Pergola / October 16, 2018 / JulietteHughes.
Using sand paper remove all paint until the surface is completely prepared. Apply a water-repellent and fungicide if necessary. Using a paint-sprayer spread evenly from the farthest end to the back. High Volume Low Pressure (HVLP) sprayer is more efficient and smooth. Use a paint roller to get a smooth finish. Give a light coating on the roof of the Pergola. Fill in the gaps and allow the paint to dry for up to four hours. Apply a second coat of paint on the roof of the pergola. Allow the paint to dry overnight. Causes of Discoloration of Pergola roofs Over time Pergola roofs may get discoloration due to dirt fungus mildew or moisture.
Pergolas have been redefined for the modern era. With so many options available you can buy a pergola that will add value beauty and enjoyment to open spaces of all sizes and shapes. For example the open air feeling of an arched pergola can transform a nice deck into your favorite hangout spot. Pergola choices are almost endless and buyers often tend to make some common mistakes that may be stressful in future. Having a checklist to shop for a pergola helps buyers avoid typical costly mistakes. Here are some tips that a pergola shopping checklist should include.
DIY pergolas are the better choice in case you want to build a pergola in your home or garden. This is because building pergolas although it requires some construction skills is something that can be done by almost any person with average or even less average construction know-how. Also the alternative is to hire a contractor and spend twice or thrice as much! Learning how to build a pergola should not be such a hard endeavor. The information network provided by the Internet is so broad and all-encompassing that it would be difficult to not find anything about something you need to research on. And steps on how to undertake a do it yourself pergola project can be researched practically anywhere. You can use either pergola plans or pergola kits for DIY pergolas.
To paint a pergola for lasting protection it is important to follow the traditional procedures such as preparing the surface which include removing old paint using sandpaper to permit absorption and applying preservative towards the end of the painting. Preparation of the surface is very important before painting as it decides how much time the effect of painting will last. Any remnants of oil or dirt on the surface of the wood should be removed thoroughly. Using sand paper with 50-60 grit create an appropriate surface for good absorption of paint. If the wood is more than two weeks old or if it had been lying outside in rain sanding brushing and cleaning becomes essential.