Pergola / August 25, 2018 / JulietteHughes
The reason is pergolas are always sized based on their roof size. And in most cases pergolas are recessed back from the roof edge anywhere from 8 inches to a couple of feet depending on the design (commonly 12"). Custom design or sizing can be a good idea to get a suitable pergola for your place. Look for manufacturers that insist on shop drawings prior to building and take the time to check everything repeatedly and make sure that all measurement and details are agreed to in writing ahead of delivery time. Assembly required/Assembly Instructions: Make sure you have collected assembly instructions from the manufacturers.
Using sand paper remove all paint until the surface is completely prepared. Apply a water-repellent and fungicide if necessary. Using a paint-sprayer spread evenly from the farthest end to the back. High Volume Low Pressure (HVLP) sprayer is more efficient and smooth. Use a paint roller to get a smooth finish. Give a light coating on the roof of the Pergola. Fill in the gaps and allow the paint to dry for up to four hours. Apply a second coat of paint on the roof of the pergola. Allow the paint to dry overnight. Causes of Discoloration of Pergola roofs Over time Pergola roofs may get discoloration due to dirt fungus mildew or moisture.
Choose the right material ii) Go for thicker structures iii) Notching and Hardware iv) Do not ignore your local weather v) Get details of manufacturers warranty vi) Reduce sizing errors to zero vii) Amount of Assembly Required Right Material: Ensure that you have chosen a pergola that will continue to look beautiful for ten years or more. The right choice of material is a key point. Most arched pergolas are built from Wood Steel/Aluminum Concrete or PVC/Vinyl. Among them wood is the most reliable and popular material. However given a vast array of wood types which include California Redwood Teak Cedar and Imported Hardwoods among others buyers easily can get confused as to which of them would be best for their situation.