Pergola / August 28, 2018 / JulietteHughes
To paint a pergola for lasting protection it is important to follow the traditional procedures such as preparing the surface which include removing old paint using sandpaper to permit absorption and applying preservative towards the end of the painting. Preparation of the surface is very important before painting as it decides how much time the effect of painting will last. Any remnants of oil or dirt on the surface of the wood should be removed thoroughly. Using sand paper with 50-60 grit create an appropriate surface for good absorption of paint. If the wood is more than two weeks old or if it had been lying outside in rain sanding brushing and cleaning becomes essential.
Look for pergola manufacturers that have been in the business for at least five years. The advantage of choosing such a manufacturer is that they can be more reliable in terms of fulfilling their product warranty or helping you with replacement parts at any time. Avoid Sizing Errors: Since most Pergola buyers are one time buyers many sizing errors are common. For example a common mistake is to assume the positioning of the 4 corner posts is the size of the pergola being offered. For instance if the four corner posts of a pergola are expected to sit on the corner of your brand new concrete pad that is 10 x 12 and purchase a 10 x 12 pergola you will discover on receiving your pergola kit that the posts are set at 8 x 10 to the outside corners.
The reason is pergolas are always sized based on their roof size. And in most cases pergolas are recessed back from the roof edge anywhere from 8 inches to a couple of feet depending on the design (commonly 12"). Custom design or sizing can be a good idea to get a suitable pergola for your place. Look for manufacturers that insist on shop drawings prior to building and take the time to check everything repeatedly and make sure that all measurement and details are agreed to in writing ahead of delivery time. Assembly required/Assembly Instructions: Make sure you have collected assembly instructions from the manufacturers.