Pergola / August 27, 2018 / JulietteHughes
Using sand paper remove all paint until the surface is completely prepared. Apply a water-repellent and fungicide if necessary. Using a paint-sprayer spread evenly from the farthest end to the back. High Volume Low Pressure (HVLP) sprayer is more efficient and smooth. Use a paint roller to get a smooth finish. Give a light coating on the roof of the Pergola. Fill in the gaps and allow the paint to dry for up to four hours. Apply a second coat of paint on the roof of the pergola. Allow the paint to dry overnight. Causes of Discoloration of Pergola roofs Over time Pergola roofs may get discoloration due to dirt fungus mildew or moisture.
Traditional pergolas can be transformed into modern style by replacing its roofing with transparent materials. There are several transparent materials which can be used as roofing such as Plexiglas sheets complete-transparent covers and glass panels. Plexiglas sheets can be used if you want protection from rain and direct sunlight without heating the sitting area of the pergola. Complete-transparent covers are used if you want to keep the traditional style of your pergola but still provide the protection you need from rain. On the other hand the glass panels can be used if your pergola is located in an open area without worrying about falling tree branches or fruits.
So while buying wooden pergolas ask their manufacturers if they are partially notched or fully notched. Buyers should be aware that notching creates interlocking joints and this fortifies the structure. Also notching insures that all your timbers stay straight and true over the decades because they cannot move. Most manufacturers skimp on notching partially or completely to reduce their construction costs and will tell you that hardware will take care of the issue. It does not. If just one of your Pergolas timbers has hidden stresses in it (quite common) as it weathers over the years it will turn twist or sag.